Clarifilter CLF-DA29-00003F Compatible With Samsung DA29-00003F Fridge Filter & More

The Clarifilter CLF-DA29-00003F is a suitable replacement for the following Samsung fridge filters: DA29-00003F, HAFIN1/EXP DA29-P and more. This is an internal replacement cartridge, which is designed for a wide range of Samsung fridge models. Featuring a heavy duty sintered Coconut block, which works by removing all of the harsh contaminants and particulates frequently found in mains water supplies. By removing these, your fridge will be left with pure, still and crystal clear water which is guaranteed to be safe to drink.

Excellent Filtration Performance – This product is manufactured using materials that meet NSF standards.

WRAS Tested and Approved – The in-depth testing by WRAS ensures that our filter does not impart odour or flavour on the water, ensures the water is free from change in colour or appearance, does not enhance microbial growth or leach harmful substances or metals into the water. WRAS approval means that our filters comply with strict Water Supply Regulations or Scottish Byelaws.

For a full list, please visit our “What will it fit tab”. 

Technical Specifications:

• Min. operating temperature: 0.6 °C / 33 °F
• Max. operating temperature: 38 °C / 100 °F
• Min. working pressure: 140kPa / 20psi
• Max. working pressure: 827kPa / 120psi
• Rated capacity: 1,137 litres / 300 gallons
• Flow rate: 1.9  lpm / 0.5 gpm

Installation:

• Slowly turn the old cartridge 1/4 turn to the left (counter clockwise).
• Pull the filter straight down and discard (the water will shut off automatically).
• Remove the protective red cap from the new filter.
• Push the new filter up into the filter cover until the filter stops.
• Turn the filter 1/4 turn to the right (clockwise) to lock it into place.
• You will feel a stop and the locked symbol should now be lined up with the indicator line above.
• Do not over tighten.
• Run water through the dispenser for 5 minutes to purge the system.
• Check the filter area for leaks.
• Reset the "Filter Indicator" light by pressing and holding the Ice Type and the Child Lock (or Moisture Control) buttons simultaneously for 3 seconds (the light should turn green).

Note: If you hold these buttons for more than 5 seconds, you'll cancel the reset process. If this happens, just release the buttons and start over.

When to change a filter: The filter cartridge should be replaced when the replacement indicator light turns red, or every 6 months, or if you notice a decrease in the flow of water from the dispenser.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The contaminants or other substances removed or reduced by the water filter device are not necessarily to be found in your water.

It is essential that operation, maintenance and filter replacement be carried out in accordance with manufacturer's recommended procedures and guidelines for this product to perform as advertised. Failure to do so may void warranty.

Important: Install on cold water line only.

Note: This filter also helps reduce lime-scale build-up to protect your refrigerator and ice maker.

Note: The VYR-11F has 2 notches "locking keys" and is not compatible with DA29-00003G filters.