Clarifilter CLF-F701R Water Filter Compatible with InSinkErator (ISE) F-701R Steaming Hot Water Tap & More

Clarifilter CLF-F701R water filter compatible replacement for the Insinkerator F701R 1100 & 3300 Steaming Hot Water Tap.

WRAS Approved

Manufactured Using NSF Standard Materials

BPA Free

£17.50 £14.58
Availability: Out of stock
SKU
CLF-F701R

This is a Clarifilter CLF-F701R undersink filter cartridge by Aquadrop, designed as a replacement for the Insinkerator F701R model. By using a high quality carbon filtration block, this filter works by removing hazardous material from your mains water supply and leaving you with clean, fresh drinking water. 

Excellent Filtration Performance – This product is manufactured using materials that meet NSF standards.

WRAS Tested and Approved – The in-depth testing by WRAS ensures that our filter does not impart odour or flavour on the water, ensures the water is free from change in colour or appearance, does not enhance microbial growth or leach harmful substances or metals into the water. WRAS approval means that our filters comply with strict Water Supply Regulations or Scottish Byelaws.

Easy to install and maintain; merely twist the filter out and replace when necessary. Like the original, we recommend that you replace this every 6 months to ensure the best possible quality water. We keep this filter in stock at all times, and will dispatch immediately.

Technical Specifications:

Operating Temperature: Min. 0.6 °C / 33 °F Max. 38 °C / 100 °F
Working Pressure: Min. 140 kPa / 20 psi Max. 827 kPa / 120 psi
Rated Capacity: 7,600 litres / 2,010 US gallons
Flow Rate: 2.8 lpm / 0.7 gpm

Installation:

  1. Slowly turn the old cartridge a quarter turn to the left until it releases.
  2. Insert the new filter and turn it a quarter turn to the right until it is secure in place.
  3. Reset your “change filter” light (if your system has one).
  4. Run water from the dispenser for 5 minutes at 0.5gpm (about 10 litres) to clear the system and prevent sputtering.

When to change a filter: The filter cartridge should be replaced when the replacement indicator light turns red, or every 6 months, or if you notice a decrease in the flow of water from the dispenser.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The contaminants or other substances removed or reduced by the water filter device are not necessarily to be found in your water.

It is essential that operation, maintenance and filter replacement be carried out in accordance with manufacturer's recommended procedures and guidelines for this product to perform as advertised. Failure to do so may void warranty.

Important: Install on cold water line only.

Note: This filter also helps reduce lime-scale build-up to protect your system.

This filter will fit the following models:

InSinkErator

F701R, 1100 and 3300 series water boilers including models HC1100, GN1100, HC3300

3M

AP3-765S, 56104-18, 70020019835, AP3-C765-S, AP3765SC

Filtrete

3US-AF01

Others 

FinerFilters FF-40, Aqua Quality AQ100, Aqua House AH-3P3, SpringClear ECO-SPC701, FilterLogic VFL-401

**Please note this is a compatible spare part and the manufacturers' names and part numbers have been used for reference purposes only**

Write Your Own Review
You're reviewing:Clarifilter CLF-F701R Water Filter Compatible with InSinkErator (ISE) F-701R Steaming Hot Water Tap & More

No Related Posts