Clarifilter CLF-FC02 Compatible with Lincat FC02 Water Filter & More

The Clarifilter CLF-FC02 has been specifically designed to fit Lincat FilterFlow water boilers that use the Lincat FC02 filter, such as the EB3F, EB4F, EB6F and EB6TF models.

Excellent Filtration Performance – This product is manufactured using materials that meet NSF standards.

WRAS Tested and Approved – The in-depth testing by WRAS ensures that our filter does not impart odour or flavour on the water, ensures the water is free from change in colour or appearance, does not enhance microbial growth or leach harmful substances or metals into the water. WRAS approval means that our filters comply with strict Water Supply Regulations or Scottish Byelaws.

Through the use of a sintered carbon block, this filter removes contaminants whilst allowing beneficial minerals to flow through the filter, providing you with clear, better tasting water.

Technical Specifications:

• Min. operating temperature: 0.6°C/33°F
• Max. operating temperature: 38°C/100°F
• Min. working pressure: 140 kPa/20 psi
• Max. working pressure: 827 kPa/120 psi
• Rated capacity: 4,000 litres/1,060 gallons
• Flow rate: 1.9 lpm/0.5 gpm

Installation:

1. Slowly turn the old cartridge a quarter turn to the left until it releases.
2. Insert the new filter and turn it a quarter turn to the right until it is secure in place.
3. Reset your “change filter” light (if your system has one).
4. Run water from the dispenser for 5 minutes at 0.5gpm (about 10 litres) to clear the system and prevent sputtering.

When to change a filter: The filter cartridge should be replaced when the replacement indicator light turns red, or every 6 months, or if you notice a decrease in the flow of water from the dispenser.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The contaminants or other substances removed or reduced by the water filter device are not necessarily to be found in your water.

It is essential that operation, maintenance and filter replacement be carried out in accordance with manufacturer's recommended procedures and guidelines for this product to perform as advertised. Failure to do so may void warranty.

Important: Install on cold water line only.

Note: This filter also helps reduce lime-scale build-up to protect your refrigerator and ice maker.