Clarifilter CLF-FC04 Water Boiler Filter Compatible With Lincat FC04 Filter Flow RX

The Clarifilter CLF-FC04 has been specifically designed to be used as a replacement filter for the Lincat FilterFlow (FX series) boilers.

This filter will provide you with a high level of filtration. This filter will remove chlorine and sediment from your water while inhibiting limescale build up from damaging your boiler.

Excellent Filtration Performance – This product is manufactured using materials that meet NSF standards.

WRAS Tested and Approved – The in-depth testing by WRAS ensures that our filter does not impart odour or flavour on the water, ensures the water is free from change in colour or appearance, does not enhance microbial growth or leach harmful substances or metals into the water. WRAS approval means that our filters comply with strict Water Supply Regulations or Scottish Byelaws.

Technical Information

• Flow rate: 1.9 lpm/0.5 gpm
• Min. operating temperature: 4°C/39°F
• Max. operating temperature: 38°C/100°F
• Min. working pressure: 207kPa/30PSI
• Max. working pressure: 552kPa/80PSI
• Rated capacity: 5678L/1500 gallons
• Flow rate: 1.9 LPM/0.5gpm

Installation:

1. Slowly turn the old cartridge a quarter turn to the left until it releases.
2. Insert the new filter and turn it a quarter turn to the right until it is secure in place.
3. Reset your “change filter” light (if your system has one).
4. Run water from the dispenser for 5 minutes at 0.5gpm (about 10 litres) to clear the system and prevent sputtering.

When to change a filter: The filter cartridge should be replaced when the replacement indicator light turns red, or every 6 months, or if you notice a decrease in the flow of water from the dispenser.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The contaminants or other substances removed or reduced by the water filter device are not necessarily to be found in your water.

It is essential that operation, maintenance and filter replacement be carried out in accordance with manufacturer's recommended procedures and guidelines for this product to perform as advertised. Failure to do so may void warranty.

Important: Install on cold water line only.

Note: This filter also helps reduce lime-scale build-up to protect your system.