Clarifilter CLF-LT500P Compatible With LG LT500P Fridge Filter & More

The Clarifilter CLF-LT500P compatible LG LT500P filter has been designed for the new range of LG fridge/freezers that require an internal style filter cartridge. This specific filter fits behind the fridge and is marked BL-9808 then please see our LG category for our other LG fridge filters. We have listed as many comparable part numbers and model numbers this filter will replace in the ‘What Will It Fit?’ tab. If you are having difficulty locating the filter you require please do not hesitate to contact us.

NSF/ANSI 42 Excellent Filtration Performance - The advanced filtration technology ensures that this filter removes/reduces chlorine, odour and taste, organic chemicals, suspended particles, as well as other potentially harmful water contaminants in your drinking water. Providing you with clean and healthy water.

WRAS Tested and Approved - The in-depth testing by WRAS ensures that our filter does not impart odour or flavour on the water, ensures the water is free from change in colour or appearance, does not enhance microbial growth or leach harmful substances or metals into the water. WRAS approval means that our filters comply with strict Water Supply Regulations or Scottish Byelaws.

Technical Specifications:

• Minimum Operating Temperature 0.6C/33F
• Maximum Operating Temperature 38C/100F
• Min Working Pressure 140kPa/20psi
• Max Working Pressure 827kPa/120psi
• Rated Capacity 1514 litres/400 gallon
• Flow Rate 1.9 lpm / 0.5 gpm

Installation:

• Turn the old cartridge in counter clockwise direction.
• Pull the filter straight down and discard (the water will shut off automatically).
• Remove the red cap from the new filter.
• Align the filter to the directed line on the control box and insert it upward.
• Turn the filter clockwise to lock it into place. Note: Check whether the directed line and the lock indicated line are aligned.
• Run water through the dispenser for 5 minutes to purge the system.
• Check the filter area for leaks.
• Reset the "change filter" indicator light (if your fridge has one) by pressing and holding the Light/Filter button for 3 seconds.

When to change a filter: The filter cartridge should be replaced when the replacement indicator light turns red, or every 6 months, or if you notice a decrease in the flow of water from the dispenser.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The contaminants or other substances removed or reduced by the water filter device are not necessarily to be found in your water.

It is essential that operation, maintenance and filter replacement be carried out in accordance with manufacturer's recommended procedures and guidelines for this product to perform as advertised. Failure to do so may void warranty.

Important: Install on cold water line only.

Note: This filter also helps reduce lime-scale build-up to protect your refrigerator and ice maker.